Precautions for the operation of cold bending machine

1. First of all, you must choose the flat platform to stabilize the machine, which can open the chassis foot to make the machine panel easy to observe. Insert the plug on the handheld head into the socket and tighten it. Pay attention to the positioning gap.

2. Secondly, insert one end of the plug of the power cord into the socket on the back of the chassis, and the other end inserts the power supply to the socket. Please use a single -phase three -line power supply. Then turn on the "Power SW." On the back panel of the chassis and press the panel "Switching" key to "Warm Up" green indicator light, and the machine can work. Press the "Setting Button" key and set it to the appropriate value, generally between 0.5-2.0 seconds.

3. Place the induction head on the container lid again, and press the start button on the handle. After the lamp is died, move the response head.

4.z, wait for the "Warm Up" green indicator light lit or the bee sounds in the machine can be used to "beep" prompts to seal the next container. Check the sealing quality. According to different materials, containers, and production efficiency, the "setting button) key is appropriately trimmed to make the seal quality better.